SST
Flange
Disc
Plate
AUTOMATIC TRANSAXLE
ASSEMBLY OF DIFFERENTIAL ASSEMBLY
1.
INSTALL PISTONS AND SLEEVE
(a)
(b)
AT4318
(c)
AT7753
2.
INSTALL PISTON RETURN SPRING
(a)
(b)
SST
(c)
AT7754
3.
INSTALL PLATE, DISCS AND FLANGE
(a)
P-D-P-D-P-D-P-D-P-D-P-D-P-D-P-D-P-D-P-D-P-D
HINT: Before assembling new discs, soak them in ATF
for at least fifteen minutes.
AT4428
(b)
AT4430
-
Component Parts (Differential Assembly-A540E, A540H)
Coat the four O-rings with ATF.
Install the four O-rings to the reaction sleeve and
pistons.
Install the No. 1 (A), No. 2 (B) pistons and reac-
tion sleeve (C) to the ring gear mounting right
case.
Place the spring on the piston.
Place SST on the spring retainer, and compress
the spring with a press.
09350-32014 (09351-32070)
Using snap ring pliers, install the snap ring.
Install the plate and discs.
Install in order: P = Plate D = Disc
Install the flange with the flat end facing downward.
AT-1 13