Answering system
Answering system settings
Call screening
Use this feature to choose whether incoming messages
can be heard over the speaker when they are being
recorded. If you turn call screening on, you hear the
incoming message. While monitoring an incoming message,
you can answer the call by pressing
the handset, or
To change the setting:
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode,
press MENU/
2. Press q
or p
CID
press
/�ELECT.
MENU
3. Press q
or p
CID
press
/�ELECT.
MENU
4. Press
/�ELECT to select Call screening.
MENU
5. Press q
or p
CID
/�ELECT to save the setting. You hear a
6. Press
MENU
confirmation tone.
NOTE: For more information on call screening, see page 86.
/��EA�ER
��EA�ER on the telephone base.
to enter the main menu.
�ELECT
to scroll to Answering sys, then
DIR
to scroll to Ans sys setup, then
DIR
to choose On or Off.
DIR
�HONE/
FLA�H
79
Answer ON/OFF
>Ans sys setup
on
Call screening
>
# of rings
CALL SCREENING
>On
Answer ON/OFF
>Ans sys setup
p
q
Call screening
>
# of rings
p
q
CALL SCREENING
>On
p
q