Make An Outgoing Call During Ptt Call; End Or Leave A Ptt Call - AT&T CL83113 User Manual

Multiple handset use
Push-to-talk (PTT)
Make an outgoing call during �TT call
• During a one-to-one PTT call, press
/��EA�ER on your telephone base to get a dial tone. The PTT call
ends automatically.
• During a one-to-group PTT call, press
handset or
ends automatically and you get a dial tone.
• During a one-to-group PTT call, press
destination handsets or press
base. That device gets a dial tone. The PTT call continues for the rest of
the PTT participants.
End or leave a �TT call
For one-to-one PTT calls, both initiating and destination devices can end the
PTT call. For PTT calls to multiple devices, the initiating device can end the
PTT call. If any one of the destination devices leaves the PTT call, the call
continues until all participants or the initiator hangs up.
Press OFF/
CANCEL
base. The screen shows �ush to talk Ended.
-OR-
Place the handset in the telephone base or charger, then the handset
return to idle mode.
NOTE: After �U�H TO TAL� on the handset or �TT on the telephone base is released, the PTT
call remains open for a short time. If no one presses �U�H TO TAL� on the handset or �TT on
the telephone base within ten seconds, the PTT call ends automatically.
/��EA�ER on the initiating telephone base. The PTT call
on the handset, or press CANCEL on the telephone
�HONE/
FLA�H
�HONE/
�HONE/
/��EA�ER on the destination telephone
57
on your handset or
on the initiating
FLA�H
on any one of the
FLA�H