Chapter 2: Getting Started; Hardware Installation - Vantec UGT-PCE430-2C User Manual

Dual/quad chip 4-port dedicated 5gbps usb 3.0 pcie host card

Hide thumbs Also See for UGT-PCE430-2C:

Table of Contents

 1 x Installation Guide

 1 x Low Profile Bracket

Chapter 2: Getting Started

1. Verify the package contents to make sure you have

everything that you need to install this card.

2. This card comes standard with the full height bracket

installed, if you are using a low profile system (Slim Line

system), please replace the bracket with the provided low

profile bracket by first removing the two screws holding the

full height bracket, replace the bracket with the low profile

bracket and secure the screws back on the card.

3. Turn off the power to your computer, unplug the power

cord and remove the cover of the computer system.

4. Remove the slot bracket from an available PCI-Express x4

(x8, x16) slot.

5. To install the card, carefully align the card's bus connector

with the selected PCIe slot on the motherboard. Push the

UGT-PCE430-2C/4C

Page 5

Table of Contents

Ugt-pce430-4c