Connecting Your Analog Receiver; Connecting Your Receiver To Tv; Connecting Your Receiver To Vcr (Depending On Model); Connecting External Audio/Hi-Fi System - NanoXX 9500HD User Manual

C
hapter 3 >> Connections

Connecting your analog receiver

To facilitate the user using analog receiver to view analog channels, this product has been
provided with a loop through terminal marked as "Loop". Connect the coaxial cable from this
terminal to the IF input terminal of your analog receiver. Now by keeping your receiver in
standby, you will be able to tune and view analog channels from your analog receiver.

Connecting your receiver to TV

To connect your receiver with your television, you can use 4 different methods; via RCA cable,
SCART cable, HDMI cable or YUV.
Connect the RF cable to the terminal marked "RF OUT" on the rear panel of your receiver and
its other end to the TV RF input socket.
Connect the Video/Audio RCA cables from the Video OUT/AUDIO OUT (LEFT, RIGHT) on the
rear of your receiver to the Video INPUT/AUDIO INPUT (LEFT, RIGHT) jacks on the TV. In the
case of connecting your TV through SCART cable, connect the SCART connector marked TV to
the respective SCART port on the TV. (depend on model)
Connect the HDMI cable to the terminal marked "HDMI" on the rear panel of your receiver
and its other end to the TV HDMI input.

Connecting your receiver to VCR (depending on model)

To connect a VCR, your receiver has been provided with SCART at the rear marked "VCR".
Using a SCART connector, the VCR can be connected to your receiver.

Connecting external audio/Hi-Fi system

To connect any external Audio Hi-Fi system, your receiver has been provided with two RCA
connectors at the rear panel of your receiver, marked with AUDIO L and R respectively to
connect the left and right Audio on the external audio/Hi-Fi system.

Connecting digital audio system

Connect a cable between S/PDIF OUT at the rear panel of your receiver and S/PDIF INPUT
COAXIAL or OPTICAL on the Digital Audio System.
English
8