Table of Contents
Advertisement
C
hapter 5 >> Main Menu
4 Press the RED (MoSAiC) button on the Manual Scan menu
• Satellite: Select the satellite by using Arrow (▲/▼ ◄/►) buttons or Page (+/-) buttons
• Transponder: Change the TP with the Arrow (◄/►) buttons
• Frequency: Displays the current Frequency
• Symbol Rate: Displays the current Symbol Rate
• FEC (Forward Error Correction): Displays the current FEC
• Polarity: Displays the current Polarity
• Add TP: Press the Green (Sleep) button for a new TP add
• Del TP: Delete the current TP with Yellow (Audio) button
• RED (MoSAiC) button: Save the TP information
<<TERRESTRIAL>>
Auto Scanning
1 Press the OK button, Auto Scanning will start.
2 Press the OK button to save the changes.
3 Press the Back ( ) button to exit from the menu and
press the Arrow (▲/▼) buttons to select the desired
channel. Now you can watch TV or listen to the Radio.
Installation >> Manual Scanning
Manual Scanning
1 Select the channel number using the Arrow (◄/►)
2 Press the OK button. Manual scanning will start.
3 Press the OK button to save the changes.
4 Press the Back ( ) button to exit from the menu and press
the Arrow (▲/▼) buttons to select the desired channel. Now
you can watch TV or listen to the Radio.
Installation >> Defaults Setting
Defaults Setting
You can restore the default setting in case you have
encountered some problems after saving changes to channel
data and others that may be in error.
1 Select Defaults Setting using the Arrow (▲/▼) buttons on the Installation menu and press
the OK button.
2 Select a defaults option (Factory Defaults, or STB Reboot) using the Arrow (▲/▼) buttons
and press the OK button.
• Factory Defaults: Resets back to the factory-default settings.
If you press the OK button in this menu, you will see a dialog box asking you to confirm
the channel defaults or factory defaults setting.
Select Yes or No, and press the OK button.
• STB Reboot
If you press the OK button in this menu, the Set-top box (STB) reboots.
English
21
Advertisement
Table of Contents
