Chapter 3 Connections; Location Of Your Receiver; Connecting Your Receiver With Dish System - NanoXX 9500HD User Manual

C
hapter 3 >> Connections
C
onnections
Loop through

Location of your receiver

• Install your receiver in horizontal position
• Do not put any heavy stuff such as a TV on your receiver
• Do not install your receiver in the places as follows: Vibrating place, direct sunrays, Humid
place, too high or low temperature, and no ventilated place.

Connecting your receiver with dish system

After installing your antenna system, connect the coaxial cable from the LNB of your antenna to
"DISH INPUT" terminal marked at the rear panel of your receiver. All cable connectors should
be finger-tightened; do not use any kind of wrench while tightening connectors. The cable
should be 75 ohm impedance coaxial twisted at the end with an "F" type connector.
English
7