NanoXX 9500HD User Manual page 16

C
hapter 5 >> Main Menu
3 Press the RED (MoSAic) button to save selected satellites and then press the Back (
) button.
4 If you press the YELLOW (Audio) button, on-screen navigation menu is highlighted.
Use the Arrow buttons to move the motor to the west, east, north, and south in order.
The position of the motor can be restricted to the software setting limits (West/East)
using the RED (MoSAic) / BLUE (SAT) buttons.
5 Press the YELLOW (Audio) button to highlight
Satellite.
6 Press the OK button on the Go to satellite Menu.
Dish changes its position to the direction of satellite
(depending on the types of motor, dish changes its
position to the default-direction of satellite for the
maximum 28 satellites).
7 Press the OK button on the Save Current Position
menu. Current position of the motor is saved
according to the selected satellite.
8 You can change the Function Menu (Go to Ref.
Position / Reset Position / Calculate Positions)
by using the Arrow (◄/►) button, activate the
function with OK button
- Go to Ref. Position: Press the OK button in the Go to Ref. Position menu. Motor
changes its position to zero longitude / latitude where the count begins.
-
Reset Position: Reset Positioner initialize the position of motor to the default value.
-
Calculate Positions: Calculate Positions selects one satellite to revise the position
of motor and saves the changes. Changed position of the motor also applies to the
directions for other satellites.
9 Confirm the Enable Limits/Disable Limits function pressing the OK button. You will
be prompted to decide whether to use the West/East setting Limits setting value.
10 The method to position motor is selected in the Continuous/Step (Impulses)/Time
(Seconds) menu. If you press the Arrow (◄/►) buttons once in the Continuous mode,
selected TP signal of the satellite is locked or the motor stops to move. In the Step
(Impulses) mode, you can select Steps (Pulse) from 1 to 10. The motor changes its
position according to the selected step if moved to the left or right (depending on the
motor).
In the Time (seconds) mode, you can select time (seconds) from 1 to 20. The
motor changes its position according to the selected step if moved to the left or right
(depending on the motor).
 USALS
1 Select Motor Setting using the Arrow (▲/▼) buttons and press the OK button.
2 Select Satellite menu using the Arrow (▲/▼) buttons and press the OK button.
Satellite list appears. Select satellite using the Arrow (▲/▼) buttons and press the OK
button. Bulleted list indicates selected satellites.
English
17