Mounting; Installation Manual Of Network Camera - HIKVISION DS-2CD883F-EW Installation Manual

Installation Manual of Network Camera

keyboards.
 Grounding
The ground screw can be connected for grounding.

2.2.4 Mounting

Before you start:
These box cameras can be installed to wall or ceiling. Wall mounting is taken as an example in this
section; if you adopt ceiling mounting, you can also take below procedure as a reference.
Steps:
1. Attach the wall mount (not provided) to the wall and tighten the screws to fix it.
Notes:
 The wall mount should be longer than 1/2 of the camera length.
 For cement ceiling mounting, you need to use the expansion screw to fix the bracket. The
mounting hole of the expansion pipe on the wall should align with the mounting hole on the
bracket.
 For wooden ceiling mounting, you can just use the self-tapping screw to fix the bracket.
 The ceiling must be strong enough to withstand more than 3 times the weight of the camera
and the bracket.
2. Secure the camera to the wall mount with set screws.
3. Route the cables for the camera. Refer to the Section 2.2.3 Wiring for detailed information.
Figure 2-5 Install the Wall Mount
Figure 2-6 Route Cables
5