HIKVISION DS-2CD883F-EW Installation Manual page 17

Installation Manual of Network Camera
2. Loosen the set screws with the hex key (supplied) to remove the lower dome.
3. Connect the RCA analog video output with a monitor to view the image of the camera. Loosen
the lens set screw and pan, tilt or rotate the lens to get a desired surveillance angle. Adjust the
lens focus to obtain a perfect image. Fasten the lens set screw.
Figure 3-4 Mount the Camera
Figure 3-5 Remove the Lower Dome
Figure 3-6 Adjust the image
10