Correcting Misalignment Of The Printing And Cutting Positions During Printing Followed Immediately By Cutting - Roland SOLJET PROIII XC-540 User Manual

Correcting Misalignment of the Printing and Cutting Positions During Printing Followed Immediately by Cutting

Procedure
1.
Check the setting for the [AUTO ENV. MATCH] menu item.
Make sure the [AUTO ENV. MATCH] menu item is set to "ENABLE."
 P. 92, "Making the Setting for Automatic Adjustment of the Printer to the Operating Environment"
2.
Execute the [ADJUST BI-DIR] menu item.

Load the media.
 P. 32, "How to Load Media"
 P. 98, "How to Load Sheet Media"
 Perform bidirectional adjustment.
 P. 111, "Correcting for Misalignment in Bidirectional Printing"
 P. 112, "Correcting for Misalignment in Bidirectional Printing More Precisely"
3.
Print a test pattern and cut it.

MENU
CUTTING MENU

CUTTING MENU
PRINT - CUT ADJ.

PRINT - CUT ADJ.
TEST PRINT
Cutting position and printing
position are misaligned.
When adjustment is needed, go on to the steps below.
6-7 Correcting Misalignment for Printing or Cutting
Press
Press
Press
Press
Press
Cutting position
Printing position
.
.
.
.
.
Cutting position and print-
ing position are aligned.
Chapter 6 Feature Reference
Cutting position
Printing position
117