225 (4-STROKE) INSTALLATION MANUAL
4. Install the top half of the cable clamp and reinstall the cowl bracket.
5. Slide the rigging tube onto the cable clamp and fasten with collar and hose clamp.
a
a -
b -
c -
d -
e -
Remote Wiring Harness
Route wiring harness through the front cable clamp. Connect wiring. Push the retainer over
the ends of the connectors. This will hold the connectors together. Secure connection in the
cowl with the releasable cable tie.
a -
b -
c -
Page 8 of 16
Top Half Cable Clamp
Cowl Bracket
Rigging Tube
Collar
Hose Clamp
a
b
Power Trim Connections
Retainer – Push Over Connector Ends
Releasable Cable Tie
b
e
d
c
c