Operation With A Pabx - Unify OpenScape DECT Phone S5 Base User Manual

Operation with a PABX

To find out which settings are required for a PABX, please refer to the PABX user guide.
Setting Tone or Pulse dialling mode
¤
. . . use
Mode OK . . . use
Setting the flash time
¤
. . . use
. . . possible flash times are listed
Saving an access code (outside line code)
Setting the access code (e.g. "0") for dialling using the fixed line network and using VoIP.
¤
. . . use
Code OK . . . then
¤
Fixed line Access external line with: . . . use
network: max. 3 digits
¤
Rule:
Call Lists: The access code will only prefix numbers from a list (list of answered
calls, list of missed calls).
All calls: The access code prefixes all numbers dialled.
Off: The access code is deactivated and does not prefix any telephone
number.
¤
Save: Save
to select Settings
to select Tone or Pulse
to select Settings
. . . use
to select Settings
For . . . use to select when the access code should be dialled
OK Telephony
Select (
OK Telephony
to select flash time
OK Telephony
to enter or change access code,
Operation with a PABX
OK Dialling
= selected)
OK Recall
Select ( = selected)
OK Access
OK
111