Additional Functions Using The Pc Interface - Unify OpenScape DECT Phone S5 Base User Manual

Rejecting/accepting a non-registered Bluetooth device
If a Bluetooth device that is not registered in the list of known devices tries to connect to the
handset, a prompt will appear asking you to enter the PIN of the Bluetooth device (Bonding).
¤
Reject: Briefly press the End call key
¤
Accept: . . . use
. . . Wait for PIN confirmation . . . then
Add the device to the list of known devices:
Use the device temporarily:
long as the device is located within transmission range or until it is switched off
Changing the Bluetooth name of the handset
The handset is shown by this name on another Bluetooth device.
¤
. . . use
the device address are shown

Additional functions using the PC interface

The Gigaset QuickSync program has been installed on the computer.
Free to download at
QuickSync functions:
•
Sync the handset's directory with Outlook
•
Upload CLIP-pictures (.bmp) from the computer to the handset
•
Upload pictures (.bmp) as screensavers from the computer to the handset
•
Upload sounds (ringtone melodies) from the computer to the handset
•
Update firmware
¤
Connecting the handset to the computer via Bluetooth (
( p. 80).
Connect the handset directly to the PC, not via a USB hub.
to enter the PIN of the Bluetooth device to be accepted
to select Bluetooth
Change
wiki.unify.com/wiki/OpenScape_DECT_Phone_S5
Additional functions using the PC interface
.
Yes
No . . . the Bluetooth connection can be used, as
OK Own Device
. . . use to change the name
p. 103) or via a USB data cable
OK
OK . . . the name and
Save
105