Aplex ARCDIS -107 User Manual

Aplex ARCDIS -107 User Manual

7”, 8”, 10.1”, 12.1”, 15”, 21.5” front panel ip65 aluminum die-casting chassis display
Table of Contents

Advertisement

ARCDIS-1xx

User Manual

7", 8", 10.1", 12.1", 15", 21.5" front panel IP65 aluminum die-casting chassis Display
Release Date
Revision
Aug. 2014
V1.4
® 2014 Aplex Technology, Inc.
All Rights Reserved.
Published in
Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: 886-2-82262881
Fax: 886-2-82262883
E-mail:
aplex@aplex.com.tw
URL:
www.aplex.com.tw
ARCDIS-1XX User Manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ARCDIS -107 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Aplex ARCDIS -107

  • Page 1: User Manual

    7”, 8”, 10.1”, 12.1”, 15”, 21.5” front panel IP65 aluminum die-casting chassis Display Release Date Revision Aug. 2014 V1.4 ® 2014 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan...
  • Page 2: Warning

    Disclaimer This information in this document is subject to change without notice. In no event shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or misuse of information in this document or in any related materials.
  • Page 3: Table Of Contents

    Table of Contents______________________ Warning!…………………………………………………………………………….……..….2 Disclaimer………………………………………………………………….…………………2 Chapter 1 Getting Started 1.1 Features……………………………………………………………………….5 1.2 Specifications…………………………………………..……………...….5 1.3 Dimensions…………………………………...………………………….…7 1.4 System Diagram...................13 1.5 Brief Description of ARCDIS-1XX ……………..………………………….14 1.6 Display Mode………………………………………………………………..21 Chapter 2 2.1 AD Board OSD Functions………………………….…..……………….….22 2.2 OSD Controls………………..…..………………………………………….23 2.3 OSD Default Parameter…..………………………………………………..24 2.4 Main Menu………………………………………………………………..…25 Chapter 3 Installation...
  • Page 4 Descriptions……………………………………………………………………...48 Specifications…………………………………………………………………..48 Board Dimensions………………………………………………………………49 Appendix C: Panel Mounting and VESA Mounting Figures Figure 1.1: Dimensions of ARCDIS-107….…...……….…………………..…..7 Figure 1.2: Dimensions of ARCDIS-108……..…………..…………………….8 Figure 1.3: Dimensions of ARCDIS-110………………………………………9 Figure 1.4: Dimensions of ARCDIS-112…………….………………………10 Figure 1.5: Dimensions of ARCDIS-115…….……….……….…….…………11 Figure 1.6: Dimensions of ARCDIS-121………………………………………12 Figure 1.7: System Diagram of ARCDIS-1xx...…………………………….13 Figure 1.8: Front View of ARCDIS-107(P)...………………………………….15 Figure 1.9: Rear View of ARCDIS-107(P)…………………………………….15...
  • Page 5: Getting Started

    Chapter 1 Getting Started 1.1 Features  Solid Aluminum Die-casting chassis Variety of LCD panel size selections Front bezel IP65 VGA/DVI input 9~36V DC wide range power input 1.2 Specifications ARCDIS ARCDIS ARCDIS ARCDIS ARCDIS ARCDIS -107(P) -108(P) -110(P) -112(P) -115(P) -121(P) Hardware...
  • Page 6 Luminance (cd/m²) Contrast Ratio 400:1 500:1 800:1 300:1 800:1 3000:1 Viewing Angle 140°/110° 140°/125° 160°/160° 160°/140° 160°/145° 178°/178° (H/V) Backlight Lifetime 40,000 hrs 50,000 hrs 30,000 hrs 9~36V DC on board Power Input Power 2.4W 3.6W Consumption Touch Screen (ARCDIS-1XX) Type Resistive Touch Window USB / RS-232 auto detect (not for ARCDIS-108),...
  • Page 7: Dimensions

    Storage 10 ~ 90% @40℃ Non-condensing Humidity IP Rating Front Panel IP65 Certificate CE/FCC Class A * If you choose different touch interface (such as USB change to RS-232), it is necessary to reset the power of ARCDIS.(plug on/off power supply) 1.3 Dimensions Figure 1.1: Dimensions of ARCDIS-107 ARCDIS-1XX User Manual...
  • Page 8: Figure 1.2: Dimensions Of Arcdis-108

    Figure 1.2: Dimensions of ARCDIS-108 ARCDIS-1XX User Manual...
  • Page 9: Figure 1.3: Dimensions Of Arcdis-110

    Figure 1.3: Dimensions of ARCDIS-110 ARCDIS-1XX User Manual...
  • Page 10: Figure 1.4: Dimensions Of Arcdis-112

    Figure 1.4: Dimensions of ARCDIS-112 ARCDIS-1XX User Manual...
  • Page 11: Figure 1.5: Dimensions Of Arcdis-115

    Figure 1.5: Dimensions of ARCDIS-115 ARCDIS-1XX User Manual...
  • Page 12: Figure 1.6: Dimensions Of Arcdis-121

    Figure 1.6: Dimensions of ARCDIS-121 ARCDIS-1XX User Manual...
  • Page 13: System Diagram

    1.4 System Diagram (Full Function) Figure 1.7: System diagram of ARCDIS-1xx ARCDIS-1XX User Manual...
  • Page 14: Brief Description Of Arcdis-1Xx

    1.5 Brief Description of ARCDIS-1XX ARCDIS-1XX is a total IP65 aluminum front bezel and chassis LCD Display, which comes with a 7 inch(luminance of 350 cd/m²) / 8 inch(luminance of 350 cd/m²)/ 10.1 inch(luminance of 350 cd/m²)/ 12.1 inch(luminance of 330 cd/m²)/ 15 inch(luminance of 350 cd/m²)/ 21.5 inch(luminance of 250 cd/m²) TFT LCD.
  • Page 15: Figure 1.8: Front View Of Arcdis-107(P)

    Figure 1.8: Front View of ARCDIS-107(P) Figure 1.9: Rear View of ARCDIS-107(P) ARCDIS-1XX User Manual...
  • Page 16: Figure 1.10: Front View Of Arcdis-108(P)

    Figure 1.10: Front View of ARCDIS-108(P) Figure 1.11: Rear View of ARCDIS-108(P) ARCDIS-1XX User Manual...
  • Page 17: Figure 1.12: Front View Of Arcdis-110(P)

    Figure 1.12: Front View of ARCDIS-110(P) Figure 1.13: Rear View of ARCDIS-110(P) ARCDIS-1XX User Manual...
  • Page 18: Figure 1.14: Front View Of Arcdis-112(P)

    Figure 1.14: Front View of ARCDIS-112(P) Figure 1.15: Rear View of ARCDIS-112(P) ARCDIS-1XX User Manual...
  • Page 19: Figure 1.16: Front View Of Arcdis-115(P)

    Figure 1.16: Front View of ARCDIS-115(P) Figure 1.17: Rear View of ARCDIS-115(P) ARCDIS-1XX User Manual...
  • Page 20: Figure 1.18: Front View Of Arcdis-121(P)

    Figure 1.18 : Front View of ARCDIS-121(P) Figure 1.19: Rear View of ARCDIS-121(P) ARCDIS-1XX User Manual...
  • Page 21: Display Mode

    1.6 Display Mode Item Resolution H Freq.(kHz) V Freq.(Hz) Remark 640x350@70 31.469 70.087 640x400@70 31.469 70.087 640x480@60 31.469 59.940 VESA 640x480@66 35.000 66.667 640x480@72 37.861 72.809 VESA 640x480@75 37.500 75.000 VESA 720x400@70 31.469 75.000 TEXT 800x600@56 35.156 56.250 VESA 800x600@60 37.879 60.317 VESA...
  • Page 22: Ad Board Osd Functions

    Chapter 2_________________________OSD 2.1 AD Board OSD Functions Auto Adjust Up/Left Down/Right Power Menu/Entry Power Indicator Power switch: To turn ON or OFF the power Shift the icon to the right side or shift it up Shift the icon to the left side or shift it down Menu: To enter OSD menu for related icon and item.
  • Page 23: Osd Controls

    When the Burn-in Mode is Unable to Eradicate… 1.) If the “RGB” is still on the top left corner of the screen, press to enter “Miscellaneous” and choose “Reset”, and then Yes, and press . When the screen goes black, disconnect power and repeat the above steps.
  • Page 24: Osd Default Parameter

    2.3 OSD Default Parameter ARCDIS-107/110/112/115 ARCDIS-108 ARCDIS-121 1. Luminance 1. Luminance 1. Luminance 1.1 Brightness 1.1 Brightness 1.1 Brightness 1.2 Contrast 1.2 Contrast 1.2 Contrast “Sharpness”is not available for 1.3 Sharpness 1.3 Sharpness ARCDIS-108 2. Management 2. Management 2. Management 2.1 H.
  • Page 25: Main Menu

    2.4 Main Menu In the Main menu, there are the following items:  Auto Adjust  Luminance  Management  Color  Volume  OSD  Language  Recall  Information  Exit For Luminance list, there are the following: ...
  • Page 26 For Color list, there are the following:  9300  6500  5400  User Preset  Exit In User Preset, there are the following:  Red  Green  Blue  Exit For Volume list, there are the following: ...
  • Page 27 For OSD list, there are the following:  H. Position  V. Position  OSD Time  Exit For Language list, there are the following:  English  Francais  Deutsch  Italiano  Espanol  日本語  繁體中文  简体中文 ...
  • Page 28: Chapter 3 Installation

    Chapter 3 Installation 3.1 Introduction to the PenMount 9036 Controller Board The PenMount 9036 control board is configured for use with the RS-232 interface. It connects to the touch screen, power supply and computer system’s RS-232 port, and supports 4-, 5- and 8-wire touch screens.
  • Page 29: Installation Of The 9036 Controller Board

    Communications: RS-232 Baud Rate: 19200 and 9600 baud rate selection Resolution: 1024x1024 (10-bit A/D converter inside) Power Input: 5V ~ 12V DC Power Consumption: 12V: 24mA+ i where (i=v/touch screen sheet R) 5V: 20mA+ i where (i=v/touch screen sheet R) Board Size: 6.0 x 2.5cm Portrait:...
  • Page 30: Introduction To Touch Screen Controller Board

    selects baud rate, PnP or non-PnP mode, and touch screen type. Set the DIP switch to configure your control board according to the definitions and settings of the table below: Switch Definition Baud Rate Adjustment 9600 19200 PnP enable or disable Disable Enable Touch screen type...
  • Page 31 Step 1. Please make sure your PenMount 6000 device had plugged in advance. If your device uses RS232 interface, please plugged in before the machine is turned on. When the system first detects the controller board, a screen appears that shows “Unknown Device”. Do not use this hardware wizard. Press Cancel.
  • Page 32 Step 3. A License Agreement appears. Click “I Agree…” and “Next” Step 4. Choose the folder in which to install PenMount Windows Universal Driver. Click Install. ARCDIS-1XX User Manual...
  • Page 33 Step 5. Wait for installation. Click Next to continue. Step 6. Click OK. ARCDIS-1XX User Manual...
  • Page 34: Software Functions

    Step 7. Click Finish to complete installation. 3.6.2 Software Functions Upon rebooting, the computer automatically finds the new 6000 controller board. The touch screen is connected but not calibrated. Follow the procedures below to carry out calibration. 1. After installation, click the PenMount Monitor icon “PM” in the menu bar. 2.
  • Page 35 Calibrate This function offers two ways to calibrate your touch screen. ‘Standard Calibration’ adjusts most touch screens. ‘Advanced Calibration’ adjusts aging touch screens. Standard Calibration Click this button and arrows appear pointing to red squares. Use your finger or stylus to touch the red squares in sequence.
  • Page 36 Command Calibration Command call calibration function. Use command mode call calibration function, this can uses Standard, 4, 9, 16 or 25 points to calibrate E.g. Please run ms-dos prompt or command prompt c:\Program Files\PenMount Universa Driver\Dmcctrl.exe -calibration 0 ( Standard Calibration) Dmcctrl.exe - calibration ($) 0= Standard Calibration 4=Advanced Calibration 4 9=Advanced Calibration 9 16=Advanced Calibration 16...
  • Page 37 Step 2.Click “Standard Calibration” to start calibration procedure NOTE: The older the touch screen, the more Advanced Mode calibration points you need for an accurate calibration. Use a stylus during Advanced Calibration for greater accuracy. Please follow the step as below: ARCDIS-1XX User Manual...
  • Page 38 Step 3.Come back to “PenMount Control Panel” and select “Tools” then Click “Advanced Calibration”. Select “Device” to calibrate, then you can start to do “Advanced Calibration”. NOTE: Recommend to use a stylus during Advanced Calibration for greater accuracy. ARCDIS-1XX User Manual...
  • Page 39 Plot Calibration Data Check this function and a touch panel linearity comparison graph appears when you have finished Advanced Calibration. The blue lines show linearity before calibration and black lines show linearity after calibration. Turn off EEPROM storage The function disable for calibration data to write in Controller.
  • Page 40 About This panel displays information about the PenMount controller and driver version. ARCDIS-1XX User Manual...
  • Page 41 Multiple Monitors Multiple Monitors supports from two to six touch screen displays for one system. The PenMount drivers for Windows 2000/XP support Multiple Monitors. This function supports from two to six touch screen displays for one system. Each monitor requires its own PenMount touch screen control board, either installed inside the display or in a central unit.
  • Page 42 Step 2. When the mapping screen message appears, click “OK” Step 3. Touch each screen as it displays Please touch this monitor. Press ‘S’ to skip Following this sequence and touching each screen is called mapping the touch screens. Step 4. After the setting procedure is finished, maybe you need to calibrate for each panel and controller NOTES: 1.
  • Page 43 the system understands where the displays are. 4. If you more monitor mapping one touch screen, Please press ‘S’ to skip mapping step. Tools Draw Tests or demonstrates the PenMount touch screen operation. Advanced Calibration Enable Advanced Calibration function Right Button Icon Enable right button function.
  • Page 44 About You can see how many devices of PenMount controller that are plugged to your system PenMount Monitor Menu Icon The PenMount monitor icon (PM) appears in the menu bar of Windows 2000/XP system when you turn on PenMount Monitor in PenMount Utilities. PenMount Monitor has the following function Control Panel Open Control Panel Windows...
  • Page 45 PenMount Rotating Functions The PenMount driver for Windows 2000/XP supports several display rotating software packages. Windows Me/2000/XP support display rotating software packages such as: • Portrait’s Pivot Screen Rotation Software • ATI Display Driver Rotate Function • nVidia Display Driver Rotate Function •...
  • Page 46: Appendix A: Board Descriptions & Specifications (Tb-6027/T)

    Appendix A: Board Descriptions & Specifications (TB-6027/T) Descriptions Model Function Descriptions TB-6027 AD board,VGA /DVI input,LVDS output,Audio AD board,VGA/DVI input,LVDS output,Audio,Touch TB-6027T controller Specifications Specifications Board Size 113mm x 170mm Chipset Mstar TSUMU58NWHJ-LF PQFP128 1 x VGA input Port,DB15 connector Input 1 x DVI-D input(option)...
  • Page 47: Board Dimensions

    Board Dimensions (units :mm) Figure A: Dimensions of TB-6027(P) ARCDIS-1XX User Manual...
  • Page 48: Appendix B: Board Descriptions & Specifications (Tb-6028/T)

    Appendix B: Board Descriptions & Specifications (TB-6028/T) Descriptions Model Function Descriptions TB-6027 AD board,VGA /DVI input,LVDS output,Audio TB-6028TU AD board,VGA /DVI-D/RCA input,LVDS output,USB/Touch controller TB-6028TR AD board,VGA /DVI-D/RCA input,LVDS output,RS232/Touch controller TB-6028TRS AD board,VGA /DVI-D input,LVDS output,RS232/Touch controller Specifications Specifications Board Size 170 x 113 x 1.6 mm Realtek RTD2533VH...
  • Page 49: Board Dimensions

    Humidity 0% - 80%, non-condensing, operating EMI/EMS Meet CE/FCC class A Board Dimensions (units :mm) Figure B: Dimensions of TB-6028(P) ARCDIS-1XX User Manual...
  • Page 50: Appendix C: Panel Mounting And Vesa Mounting

    *Tighten the mounting clips to the specified torque to provide a proper seal and to prevent damage to the product. Aplex assumes no responsibility for water or chemical damage to the product or other equipment within the enclosure due to improper installation.

Table of Contents