Outdoor Best Burn Practices; Operation - Pro-Fab Industries Cozeburn Installation And Operation Instructions Manual

Outdoor hot water wood furnace
Table of Contents

Advertisement

1.
Read and follow all operating instructions supplied by the manufacturer.
2.
FUEL: Use only those fuels recommended by the manufacturer of the unit. Never use the following: trash, plastics, gasoline,
rubber, naphtha, household garbage, material treated with petroleum products (particle board, railroad ties and pressure
treated wood), leaves, paper products, and cardboard.
3. LOADING FUEL: For a more efficient burn, pay careful attention to loading times and amounts. Follow the manufacturers
written instructions for recommended loading times and amounts.
4. STARTERS: Do not use lighter fluids, gasoline, or chemicals.
5.
LOCATION: It is recommended that the unit be located with consideration to prevailing wind direction.
▪ Furnace should be located no less than 100 feet from any residence not served by the furnace.
▪ If located within 100 feet to 300 feet of any residence not served by the furnace, it is recommended that the stack be at
least two feet higher than the peak of that residence.
6.
Always remember to comply with all applicable state/provincial and local codes.
COZEBURN INSTALLATION AND OPERATION MANUAL

OUTDOOR BEST BURN PRACTICES

OUTDOOR FURNACE MANUFACTURER'S CAUCUS

OPERATION

19

Advertisement

Table of Contents
loading

Table of Contents