Elation TVL1000 User Instructions page 6

TVL1000
1. Press the MENU button until "MANU" is displayed, press
ENTER. "LED1", "LED2" or "DINN" will be displayed. LED 1 is
warm white, LED 2 is cool white, and DIMM is the master
dimmer for this mode.
2. Use the UP or DOWN buttons to scroll to the color you
would like adjust first, and press ENTER.
3. Use the UP or DOWN buttons to adjust the intensity of the
chosen color, and press ENTER after the adjustment.
4. Continue to make adjustments to the two colors until your
desired color is reached. Once your desired color is reached do
not leave this mode.
5. To leave this mode, press the MENU button. Once you leave
this mode, all settings will be reset.
DNST
- This mode can be used as a precaution mode, that
in case the DMX signal is lost, the operating mode chosen
in the setup is the running mode the fixture will go into when
the DMX signal is lost. You can also set this as the operat-
ing mode you would like the unit to return to when power is
applied.
1. Press the MENU button until "DNST" is displayed, press ENTER.
2. Either "MASL", "BLND", or "LAST" will be displayed. Choose an
operating mode you would like the unit to start up in when power
is applied or the DMX signal is lost.
• MASL (Master Slave) - If the DMX signal is lost or power is
applied, the unit will automatically go into Master Slave mode.
• BLND (Blackout) - If the DMX signal is lost or power is applied,
the unit will automatically go into stand by mode.
• LAST (Last State) - If the DMX signal is lost the fixture will stay in
the last DMX set up. If power is applied and this mode is set, the
unit will automatically go into the last DMX set up.
©Elation Pr fessionals® - www.elationlighting.com - TVL1000 Instruction Manual Page 11
o
System Menu TVL1000
3. Press ENTER to confirm your desired set up.
LED -
turn off after 20 seconds.
1. Press the MENU button until "LED" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display On at all
times, or "OFF" so that the LED display turns off after 20 sec-
onds.
3. Press ENTER to confirm.
DISP -
1. Press the MENU button until "DISP" is displayed, press
ENTER.
2. Press the UP button to select "DSIP" to activate this function,
or "DISP" to deactivate this function.
3. Press ENTER to confirm.
BATT
1. Press the MENU button until "BATT" is displayed, press
ENTER.
2. Either "CHAR", "LOAD", or "STAT" will be displayed. Use the
UP or DOWN buttons to scroll through the functions, and press
ENTER to select your desired function.
• CHAR (Charging) - When this is selected you are able to charge
or stop charging the battery. When a power cable is connected
and "ON" is selected, the battery is now being charged. To stop
charging, select "OFF".
• LOAD (LED On or OFF) - This will let you blackout the LED while
©Elation Pr
With this function you can have the LED display
This function will reverse the display 180º.
- This function is used for battery charging.
fessionals® - www.elationlighting.com - TVL1000 Instruction Manual Page 12
o
System Menu