Using the AVT viewer applications
Using the AVT viewer applications
Using VIMBA Viewer
Launch the application
1. Launch the VIMBA Viewer application. Wait for the camera to appear in the
This chapter describes the use of two viewer applications offered by AVT—VIMBA
Viewer and GigE Sample Viewer. The viewer applications are used to stream live
view images from the camera, adjust the camera parameters and test function-
ality.
www
The AVT VIMBA Viewer can be downloaded from the AVT web-
site:
http://www.alliedvisiontec.com/us/products/software/
vimba-sdk.html
www
The GigE Sample Viewer can be downloaded from the AVT web-
site:
http://www.alliedvisiontec.com/emea/products/legacy.html
This section describes main features of the VIMBA Viewer.
"Detected Cameras" list. This may take up to one minute in network card
"Obtain an IP address automatically" mode.
Figure 9: VIMBA Viewer window
If a camera does not appear after some time, try the following:
•
Confirm the camera is powered.
•
Confirm the Ethernet cable is connected to the host PC.
AVT GigE Cameras Installation Manual V1.0.1
26