Table of Contents
Advertisement
Multicasting configuration
Multicasting configuration
Multicasting allows multiple hosts on the same network to receive camera
image data. One host acts as master/controller, and the others act as monitor.
Most network hardware only supports multicasting at maximum packet size
1500.
www
For enabling/disabling multicasting, see:
PvAPI users:
VIMBA users:
[Windows]
Ensure camera packet size is 1500. No additional setup is required.
[Linux]
Multicasting only works if the application is run as root. Additionally, you may
have to add manually a route:
> sudo route -n add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
where, eth0 is the adapter used for camera.
[OSX] (PvAPI only)
Multicasting is not supported on Mac OS X.
AVT GigE Camera and Driver Attributes
AVT GigE Camera and Driver Features
AVT GigE Cameras Installation Manual V1.0.1
document
document
46
Advertisement
Table of Contents
Troubleshooting
