Ethernet Adapter Configuration; Installation Of Ethernet Adapter Driver; Modify Ethernet Adapter Ip Address - AVT Bigeye G Installation Manual

Installing hardware

Ethernet adapter configuration

1. PC: Install the (second) Gigabit Ethernet network card in your host computer
2. Cancel the Found new Hardware Wizard window that may appear when Win-

Installation of Ethernet adapter driver

3. Install the network card driver from your network card manufacturer. This

Modify Ethernet adapter IP address

4. After initial Ethernet adapter hardware installation, connect the Ethernet
according to the instructions you got from your network card manufacturer.
Laptop: Insert the Gigabit Ethernet ExpressCard into your laptop.
dows detects your network card.
manual references the Intel Gigabit CT series, an equivalent can be found from
other manufacturers.
www Follow the link below to download the latest drivers
for Intel adapters.

http://www.intel.com/p/en_US/support/detect
Run installation application provided by driver manufacturer. If no installation
application is provided, update the driver manually:
[Windows 7]
– Start
– Control Panel
– Hardware and Sound
– Device Manager
– Expand Network Adapter
– Right-click Adapter device name
– Properties
– Driver tab
– Update driver
– Install from specific location
(identify installation directory)
adapter directly to the camera. The default configuration assigns an IP address
automatically using the Link-Local Address range of 169.254.xxx.xxx or an
address defined the by the DHCP server, if present.
Figure 1: Adapter properties, driver tab,
Windows 7
AVT GigE Cameras Installation Manual V1.0.1
17