Modifying Camera Ip Address; For Vimba Users - AVT Bigeye G Installation Manual

Modifying camera IP address

Modifying camera IP address

For VIMBA users

1. Ensuring that the adapter is in Auto IP configuration, launch the VIMBA Viewer
2. Wait for the camera to be listed in the "Detected Cameras" list.
3. Right-click the desired camera and select Open CONFIG.
Figure 22: Example - Opening camera in configuration mode using VIMBA Viewer (Windows OS)
AVT GigE Vision cameras support a number of IP addressing modes. Cameras
shipped from the factory are configured to DHCP. If a DHCP server is not present,
the camera uses the LLL / Auto IP configuration mode.
Configuration Mode Description
VIMBA: DHCP
PvAPI: DHCP
VIMBA: LLL
PvAPI: Auto IP
VIMBA: Persistent
PvAPI: Fixed
Table 4: Camera IP configuration modes
The camera IP address can be fixed by changing the configuration mode and
defining the desired address.
The camera may not be detected by the viewer if the IP address of the adapter is
not on the same subnet as the camera. In this case, start by configuring the
adapter to Auto IP mode.
application.
Obtain an IP address automatically using DHCP
(Fallback to LLL/Auto IP)
Obtain an IP address automatically
(169.254.xxx.xxx)
IP address is assigned by the user
AVT GigE Cameras Installation Manual V1.0.1
35