Getting Started; Installing The Unit; Installing On A Tv Stand - Sony KXL-40ZX1 Bravia Operating Instructions Manual

Getting Started

1. Installing the Unit

The following steps must be performed to
correspond with the installation steps in the
instruction manual of the optional accessories.
Follow the instructions in this manual referring to
the instruction manual supplied with the
accessories. For explanations referred to in ( ) in
the installation steps, see the same steps in the
instruction manual supplied with the accessories.

Installing on a TV Stand

Prepare the following item;
– SS-TBL700 Speaker System (not supplied)
~
• Before performing the following instructions, first you
must prepare the SS-TBL700 Speaker System (Table-
Top Stand). Attach the Base Plate to the Table-Top
Stand as shown in the instruction manual of the SS-
TBL700 Speaker System.
• Do not remove the blue tape that secures the plate on
the rear of the monitor, until you finish installing the
Table-Top Stand.
1
Remove the stand cover.
Stand
cover
2
Gently slide the monitor onto the neck of the
Table-Top Stand by aligning the F mark of the
plate to the top part of the Table-Top Stand.
Be sure to work with two or more people.
F mark
3
Attach the monitor to the Table-Top Stand
using the screws (supplied with SS-TBL700).
Attach the two bottom screws first, then the
top two screws.
Top part
Top screws
Bottom screws
(Continued)
5
GB