Sony KXL-40ZX1 Bravia Operating Instructions Manual page 7

Screw
Spacer
Remove the four screws from the rear of the
1
monitor.
Place the spacers (black) on the screw holes of
2
the previous procedure.
2
Follow steps 4-3 to 4-4 referring to the
instruction manual supplied with the Wall-
Mount Bracket.
When using only the Wall-Mount Bracket
Proceed to the following step 5 in this manual.
When using the Speaker System
Proceed to the following step 3 in this manual.
3
Lift the Lock Bracket to insert the Speaker
System (4-5).
Mounting Bracket
Lock Bracket
This part goes on top of the Mounting Bracket
4
Fix the Speaker System with two screws
(supplied with the Speaker System).
Speaker System
Insert to the joint of
the monitor
Screws
5
See the instruction manual supplied with the
Wall-Mount Bracket, and follow steps 4-6 to
4-7.
6
Connect the mains lead (supplied) to the AC
IN socket (5-1).
AC IN
When installing the Speaker System
Fix the mains lead with the two hooks, and
drop the lead down from the right edge of the
monitor.
~
• When using with an HDMI equipment, also
connect the HDMI cable to the HDMI IN socket
(page 10).
7
Follow the instruction manual supplied with
the Wall-Mount Bracket to continue installing
this product on the wall.
~
• You cannot connect the cables to the monitor
after it is wall-mounted.
• When moving the monitor, lift it with a soft cloth
underneath to prevent damage. Do not hold the
speaker.
7
GB