Table of Contents
Advertisement
Make sure that the power switch
Make sure that the power switch
on the rear of the TeraStation is
in the ON position, with the "
ON position, with the "
ON
symbol pressed down.
Press the power button on the
front panel. The LED's will swirl as
your TeraStation boots up.
After your TeraStation has completed booting up and the LED's have ceased to
After your TeraStation has completed booting up and the LED's have ceased to
swirl, check the LINK/ACT LED on the front of the TeraStation. If it's lit, then your
LINK/ACT LED
LINK/ACT LED on the front of the TeraStation. If it's lit, then your
TeraStation is connected properly, and you can go on to page 8. If it's not lit, turn
to page 7 for troubleshooting.
page 7 for troubleshooting.
page 7
TeraStation Quick Setup
I"
6
Advertisement
Table of Contents
