Buffalo TeraStation HD-HTGL User Manual page 27

Disk Management (RAID Confi guration)
This page shows your current RAID arrays. You
may delete old arrays or create new ones by
clicking on the underlined RAID Array # under
RAID Array Confi guration.
You may also disable RAID Array Error Detection
Response from this page. Normally, this is set to
automatically shut down the RAID array when an
error is detected. Though it is not recommended,
you may disable that behavior by clicking Disable
and then Apply under Apply Apply under
Response.
Note that your TeraStation has four internal hard drives. Before creating a new RAID array, you may have to
delete one or more pre-existing RAID Arrays to clear up the hard drives for your new one. This will destroy all
data currently on the disks, so back up any important data before deleting RAID arrays. Whether you want to
clear out an old array or create a new one, begin by clicking on the array's underlined RAID Array #, under
Name.
RAID Array # under RAID Array #
RAID Array Error Detection
27
Advanced Settings