Buffalo TeraStation HD-HTGL User Manual page 19

11. Diagnostic LED – The Diagnostic LED may
fl ash when the TeraStation encounters an error. In
this event, please contact our 24/7 technical support
at 1(866) 752-6210.
12. Power – This LED glows a steady green while
the TeraStation is operating normally.
quickly during bootup and shutdown, and slowly
while the TeraStation is in sleep mode.
13. Link/Act – This LED will glow when the
TeraStation is connected to a network, and blink
during normal network activity. It changes color
to indicate the speed of the connection: blue for a
1000Mbps connection, green for 100Mbps, and red
for a 10Mbps connection.
14. Power Socket – Plug the power cord into this
socket.
15. Power Switch – This is the TeraStation's
master power switch. While it is on, the power
button on the front panel of the TeraStation may
be used to start and shut down the unit. When
this switch is off, no power goes to the unit. If
this switch is left off for an extended period of
It blinks
time, the TeraStation's internal system clock
may need to be reset.
16. Internal Fan – The internal fan will adjust
its speed according to the temperature inside the
TeraStation. To prevent possible overheating,
keep the fan clear and clean of obstacles or
dust.
17. INIT Button – The INIT button restores
your TeraStation to factory default settings. See
page 51 for more information on using the INIT
button.
19
TeraStation Diagram