Konica Minolta Konica Print Utility KP User Reference Manual page 25

Printing w w ith K K P
Printer Options
5.
6.
Media Type
To access your choices for the Media Type feature, enter 5 at the Printer Options List. The
choices you will see are as follows:
Media Type choices
1. Plain Paper (default)
2. OHP Transparency
3. Thin Paper
4. Thick Paper
Enter selection number for Media Type [1]:
To change the setting, press the number of your choice; pressing Return will take you
back to the Printer Options List.
$
For more information about Media Type settings, refer to the User's Reference Guide
included with your Konica Workgroup Document System.
Duplex Mode
To access your choices for the Duplex Mode feature, enter 6 at the Printer Options List.
The choices you will see are as follows:
Duplex Mode choices
1. Off (default)
2. Long Edge Binding
3. Short Edge Binding
Enter selection number for Duplex Mode [1]:
To change the setting, press the number of your choice; pressing Return will take you
back to the Printer Options List.
$
For more information about Duplex settings, refer to the User's Reference Guide included
with your Konica Workgroup Document System.
Media Type selection allows you to set the printer to print on
a specific type of paper. For best results, use only paper rec
ommended by Konica.
Duplex printing prints on both sides of a sheet. Descriptions
of binding options are as follows:
Long Edge Binding
Konica Print Utility 22
Short Edge Binding