The Nx Pad - NEC VersaPro VC User Manual

7

The NX Pad

This section covers the NX pad usage and extended feature settings, as well as the
driver update process.
Using NX Pad
When settings are at the factory default values, the following operations can be
performed with the NX pad.
Operation name
Move the mouse Touch the pad and move your finger in the direction you want
pointer to move the mouse pointer to.
Click Press and immediately release any part of the pad except the
lower right part.
Right click Press and immediately release the lower right part of the pad.
You may also press and immediately release the pad with
two fingers.
Double click Move the pointer to an icon or folder, and quickly click twice.
Drag Move the pointer to an icon or a folder, press the pad, and
move your finger on the pad while continuing to press the
pad.
Scroll Click the application window displaying the scroll bar and
touch two points on the pad. The two points should be slightly
far from each other.
Move your two fingers in the direction you want to move the
scroll bar to.
Zoom Click the application window that you want to zoom in to or
zoom out from, and touch two points on the pad.
While keeping your fingers in the same place, you can zoom
in or zoom out by widening or narrowing the distance
between your fingers.
Rotate Click the application window that you want to rotate, and
touch two points on the pad.
While keeping your fingers in the same place, rotate and twist
the two fingers.
Scroll, zoom, and rotation are not supported by some applications.
10
NX pad operation
Tapping a fingertip against the pad results in a click. Quickly tapping the pad twice
results in a double-click. Tapping the pad to produce a click or double-click is
called "tapping" or "double tapping".
If you tap the pad with the pointer aligned on the target, and then touch the pad
again and move your finger, this operation will result in a drag.
Configuring NX pad
Configuration of the NX pad buttons, pointer behavior, and extended features is
done using the [Mouse Properties] window.
1
Click [Desktop] on the start screen.
2
Display the charm bar on the desktop, and click [Settings].
3
Click [Control Panel].
4
Click [Hardware and Sound], and click [Mouse] in [Devices and Printers].
The [Mouse Properties] window should come up.
Click on each tab in the [Mouse Properties] window to change the NX pad
settings.