Configuring For Ipx Peer-To-Peer Printing By Specifying The Device Manually - Konica Minolta PageScope User Manual

5 Peer-to-peer Print Setup
5.2.2 Configuring for IPX Peer-to-peer Printing by
Specifying the Device Manually
Perform the following steps to specify the device manually when
configuring for IPX peer-to-peer printing. See 5.2.1 Configuring IPX
Peer-to-peer Printing for the procedure you should use when the
device you want to configure is included in the
dialog box.
Setup
1. Select
P2P Setup
dialog box.
You could also click the toolbar
2. Click the
Manual P2P
dialog box.
3. Under
IPX Connection
want to use to select it. The following methods are supported.
• Print Server Name Specify the device using its print server
• Network Address Specify the device using its IPX address.
4. Type the device destination into the text box that becomes enabled
to the right of the method you select.
30
on the menu to display the
Setup
button to display the
, click the device specification method you
name. (You could verify the Print Server
Name in NetWare setting. See 4.3.1 Setting
up the Print Server)
Device List
button.
P2P Manual Setup
on the
P2P
P2P Setup