Konica Minolta PageScope User Manual page 31

5 Peer-to-peer Print Setup
2. Select the
TCP/IP Connection
display a list of network devices for which ports can be created.
To refresh the information in the
under the list.
3. In the
Device List
device you want to configure is not in the list, specify it manually.
See 5.1.2 Configuring for TCP/IP Peer-to-peer Printing by
Specifying the Device Manually.
4. Check the port number to be used for TCP/IP peer-to-peer printing
in the
Port Number
about configuring a port number.
5. Click the
Add Port
dialog box that appears.
6. If everything is the way you want, click the
7. When the
Success
The
P2P Setup
Peer-to-peer Port.
Note
• The device may need to be reset after creating the port. In that case, a
dialog asking if you want to reset the device immediately will appear.
26
option under
, select the device you want to configure. If the
box. See 4.2 Configuring TCP/IP for details
button. Check the details of the setup in the
dialog box appears, click
dialog box appears. See 5.3 After Creating the
Device List
, click the
Device List
button.
OK
OK
to
button
.