Specifying Bootp - Konica Minolta PageScope User Manual

6 Option Setup

6.3 Specifying BOOTP

Perform the following steps to specify the settings for operation as a
BOOTP server.
1. Select
Option
box.
2. Click the
BOOTP Setting
3. To operate as a BOOTP server, put a check mark beside
BOOTP Server
settings.
To specify an IP address range for assigning the BOOTP server:
1. Select the
Using a range
2. Enter IP addresses into the
button.
Append
The specified IP addresses are added to the
To specify a single IP address for assigning the BOOTP server:
1. Select the
Individually
2. Enter an IP address into the
button.
Append
The specified IP address is added to the
36
on the menu to display the
Setup
tab.
, and then specify the following BOOTP server
option.
Start
option.
Single
and boxes, and then click the
End
Client List
box, and then click the
Client List
dialog
Option
Enable
box.
box.