Ipp Printing - Konica Minolta Network Interface Card NC-6 User Manual

Getting Ready

IPP Printing

1
Check that all of the accessories have been included in the package.
("3 Checking the Accessories")
2
Connect the network cable. ("4 Connecting the Network Cable")
3
Specify the IP address, subnet mask, and default gateway settings for
the copier. ("5 Assigning an IP Address")
4
Print the Configuration Page and check the settings. ("6 Printing the
Configuration Page")
Note
The Configuration Page cannot be printed for copiers that are not
equipped with the fax function.
5
Install the printer driver. Add a network port during the installation of
the printer driver.
❍ For instructions on installing the GDI driver, refer to "GDI Printer
Controller" in the manual provided with the copier. For instructions
on installing the optional PCL driver, refer to "PCL Printer
Controller" in the manual provided with the PCL printer controller.
For details on specifying the network port, refer to "7 Connecting
the Computer and Copier".
NC-6
2
2-9