Konica Minolta Network Interface Card NC-6 User Manual page 38

Connecting the Computer and Copier
5
Start up PageScope Light and log in to the Administrator mode, select
NetWare Configuration
PageScope Light to specify the following settings on the copier.
❍
Refer to "8 Using PageScope Light" for details.
6
Load MONITOR.NLM using the NetWare server console.
7
From the NetWare Server console, display the print server screen,
and check that the printer name entered in step 4 is displayed for
Printer 0 and that it is listed as "Waiting for job".
[Enable NetWare] [*]
[Frame Type] [*]
[Print Server Name]
[NDS Context Name]
[Print Server Password]
[Password Retype]
[Preferred File Server]
[Preferred NDS Tree]
[Print Queue Scan Rate]
[*]
[Connection Mode]
[Mode] [*]
* If changes are made to settings marked with "*", turn the machine off, then on again.
NC-6
from the "Network" tab, and then use
NDS
Enable (Enabled if check box is selected.)
Auto detect (Select the frame type suitable for your network
environment.)
Manually enter the name of the print server created in step 4.
The context name for the
Pserver
(Only specify this setting if it is also set on the NetWare server.)
(Only specify this setting if it is also set on the NetWare server.)
No settings required
The tree name for Pserver
login
1 (Change as necessary.)
Directory Services
NPrinter
Bindery
No settings required
The file server name for the
Pserver
No settings required
Bindery
7
7-11