Selecting The Network Print Method; For Windows 95 (Osr 2.5)/ Windows 98/ Windows 98 Se/ Windows Me - Konica Minolta Network Interface Card NC-6 User Manual

2
2.1

Selecting the Network Print Method

Once a network card has been installed, various methods for network
printing become available. This section describes how to select the
appropriate network print method for the type of operating system that you
are using.
For Windows 95 (OSR 2.5)/ Windows 98/ Windows 98 SE/ Windows
ME
TCP/IP protocol
Peer-to-Peer Printing
G Using the Peer-to-Peer Utility, you can connect a copier and computer
to the same network.
G The Peer-to-Peer Utility is automatically installed when you install the
printer driver.
G
The TCP/IP protocol is used.
Network Setup Printing
G
Using the Network Setup utility, you can connect a copier and
computer to the same network.
G
The Network Setup utility is included on the PageScope CD provided.
G
The TCP/IP protocol is used.
Note
For instructions on using the Network Setup utility to set up network
printing, refer to the manual included on the PageScope CD.
2-2
Windows 95 (OSR2.5)
Windows 98
Windows 98 SE
Windows ME
Getting Ready
I Peer-to-Peer
I Network Setup Utility
NC-6