Genie NVRX4 User Manual page 45

Indicates that the lock is activated, this icon changes back from
black to colour when unlocked.
Indicates that an alarm is set. To set the alarm function, press the
Alarm button on the front panel.
Indicates that alarm output is activated
Event indicator. When there is an event (motion recording, video
loss, HDD fail, S.M.A.R.T), this icon will be highlighted.
Indicates that a network client is connected to the NVR.
Indicates that sequencing mode is enabled
Displays the current date and time.
Remote control ID display. If a remote ID is not set, the message
"ALL" is displayed.
Displays the amount of recording on the hard disk from 0-99%.
Indicates that HDD is recycled.
Continuous recording in progress.
Manual recording in progress. To set the Manual recording mode,
press the Record button on the front panel.
Motion alarm recording in progress.
Sensor recording in progress.
Right click the mouse and the quick operation window is displayed; as shown below.
45