Table of Contents
Advertisement
Menu Item
Select a channel to apply the following settings; using the mouse or the control
button on the remote control. To change the values of all channels, take the
following steps. Select the following
CHANNEL
Assign the recording mode for the selected channel. Options are:
RECORDING
Continuous, Motion, Schedule or Disable.
SENSOR
Select the sensor setting for the selected channel.
RECORDING
Enable/disable pre-event recording. Pre-event recording time is up to 20
PRE RECORD
minutes.
POST EVENT
Set the post event recording time duration for the specified channel.
RECORD
(10~60 seconds)
AUDIO
Enable/disable audio recording for the specified channel.
SCHEDULE
Set the recording schedule.
Menu Items in the RECORD Setup Screen
Description
to change the values of all channels.
28
Advertisement
Table of Contents
