Table of Contents
Advertisement
4-4. Setup – DEVICE Mode
In the SETUP menu, select the DEVICE tab. The device menu is displayed as pictured below.
Navigate through the menu items using the mouse, or the control button on the remote
control, to change the values.
Item
ALARM OUT
CHANNEL
AUDIO SOURCE
KEY TONE
REMOTE CONTROL ID
SENSOR
IEE 802.3af PSE
STATUS
Menu Items in the DEVICE Setup Screen
Set the sensor, motion, and video loss for triggering alarm relay.
HDD Error and Video Loss can trigger beeping.
Select specified channel for Motion Zone setup.
Select IP Camera Audio or Local Audio.
Enable/disable key tone from front panel usage.
Set the remote control ID.
1. Select ID.
2. Input the remote control ID number.
3. An icon indicates on the Live Screen if the remote control ID is
synchronised.
The options are from 0 to 99.
Select the type of each sensor.
Options are Off, Normally Open or Normally Closed.
PSE (Power Sourcing Equipment) Status Monitoring Menu
Description
30
Advertisement
Table of Contents
