Table of Contents
Advertisement
Item
OSD
OSD CONTRAST
SEQUENCE
SEQUENCE
DWELL TIME
CHANNEL
NAME
COVERT
VIDEO OUTPUT
4-3. Setup – RECORD Mode
In the SETUP menu, select the RECORD tab. The RECORD menu is displayed as pictured
below. Navigate through the menu items using the mouse, or the control button on the
remote control, to change the values.
Menu Items in the DISPLAY Setup Screen
Enable/disable on-screen-display.
Set the visibility level of the On Screen Display (OSD) (0~100).
Enable/disable sequential display of video in full screen mode.
Set the dwell time of each single channel display in sequential display
mode (3~60 seconds).
Select a channel to apply the name and covert setting changes, using
the mouse or the control button on the remote control.
Select a channel to apply the following settings using the mouse.
Set the channel name. Press the right square button and set the
channel name and select OK using the mouse.
The name can contain up to 36 characters.
Enable/disable display of the specified video channel in live display.
Select 1280x720 or 1920x1080.
Description
27
Advertisement
Table of Contents
