Wifi Setting; Alarm Setting - Wansview NCZ550W Operation Manual

http://www.wansview.com
5.2.2

WIFI setting

WiFi setting interface as fig. 11, please set the WiFi as following step:
Tick "Enable Wi-Fi"，click "Apply" to save the settings, then restart the device
1)
Click "Search Wi-Fi", pop up search dialogue;
2)
Click "search" it will list all searched WiFi signal;
3)
Choose WiFi signal you want to join in, click "Select" button and close search
4)
dialogue;
5) In key blank, fill in encryption password of selected WiFi;
6) Set WiFi IP address(obtain automatically by
setting;
7) Unplug the cable, Wifi connection is done.
Notice：

Because WiFi uses common channel, it is vulnerable to interference from other
wireless signals, and different environment (such as open place or buildings), the
transmission distance will be different, please pay attention to the reliable distance
to ensure work properly. When searching signals, please use the signal with
intensity value above 30%.

WIFI supports 802.11b/g/n.
5.2.3

Alarm setting

Alarm setting interface as fig. 12, it can set alarm parameters.
Fig. 11
default) , then click "Apply" to save the
15