Wansview G6 - 2K Light Bulb Camera Wireless Outdoor Indoor for Home Manual

Product Diagram

Indicator Lights Status

Warm note: Please make sure your router is connected to Internet.

User's Guide

1. Download and Install
   Go to the App Store or Google Play to search and download the "Wansview Cloud" APP on your smartphone. Or scan below QR code to get the APP.
   
   
   
2. Register Account
   Open the "Wansview Cloud" APP and register an account with your email and activate it.
   Tips: Your password must be 8-16 characters, and contains at least the following three categories: numbers, uppercase letters, lowercase letters, or special characters.
3. Screw the light bulb camera into the bulb socket to make sure the camera is powered on.

Add Device

1. Before adding a device on the APP, please be sure that your smartphone is connected to 2.4Ghz WiFi. 5Ghz WiFi is not supported.
   And then click "Add Device" or click "+'
   

Select Model

2. Select Model G6
   

Camera Setup

3. Place the camera near the router, within 1 meter.
   Power on the camera, then wait 1-2 minutes Please check if the camera's indicator light is intermittently double flashing white.
   

WiFi Setup

4. Your 2.4Ghz WiFi name is obtained automatically, enter your WiFi password, click button to check whether the WiFi password is correct.
   There shouldn't' t be any spaces in your password.
   * If your APP doesn' t recognize the WiFi name automatically, please activate the GPS and location authorization on the settings of your smartphone. Then go back to the previous page "Camera Setup" and then click "Flashing" to check if the APP recognizes the WiFi name automatically.
   
5. Place the QR code 3-8 inches in front of the camera lens. If you hear "QR code scanning is successful", please press "Next"
   

Wait for Connection

The white light flashes, meaning the Wi-Fi is connecting to Wi-Fi. Until the white light is solid, meaning the pairing is successful.
You can modify the name of the camera and click "OK" to view the live video.

Questions and Answers

If you can't find solutions with this guide, please contact our customer service for help with a photo of the label (including a QR code) on the bottom of the camera:
service@wansview.com
service3@wansview.com

Fail to Scan?
If you fail to scan the QR code on the smartphone, please try the following solutions:

1. Make sure the white indicator light flashes. If not, press the reset button until the white light flashes quickly.
2. Adjust the distance between the camera's lens and the smartphone to 3-8 inches, adjust the brightness to medium, or double-click the QR code to enlarge it to scan.
3. If it still fails, tap Didn' t hear it" and connect WiFi via Soft-AP method.

Fail to Connect WiFi?
If you fail to connect WiFi for the first time, please try the following solutions:

1. Be sure that the WiFi is 2.4Ghz, our camera doesn' t support 5Ghz.
2. Please activate the GPS and location authorization on the settings of smartphone.
3. Tap ""button to make sure the WiFi password is correct. There shouldn't be any spaces.
4. Please check if the camera's indicator light is intermittently double flashing white.

What should you do if the led isn't flashing?
Please try to reset the camera (Process: keep the camera powered on for more than 1 minute, then press and hold the "Reset" button until the LED starts flashing.)

APP is showing "Offline"?

1. Ensure the router is working properly. Reboot the router and camera to see if the camera reconnects after that.
2. If not, reset the camera by holding the Reset button 5-10s and reconnect the camera.
3. The distance between the camera and router should be within 5 meters, so camera can receive good WiFi connection.

Cloud Storage
"Wansview Cloud" APP is FREE, Cloud Service is Optional.
Even if you don't want to activate the cloud storage, you can still use the camera normally.

APP Can't Recognize the SD Card?

1. Make sure the SD card works properly by testing the write and read files functions on a computer via a SD card reader, then insert the SD card in the camera.
2. Please power off the device before inserting the SD card.
3. The device only supports FAT32 format, 128GB Max; please format the SD card into FAT32 format on your computer via a card reader.

Manufacturer: Shenzhen Golden Vision Technology Development Co., Ltd
Address: No.6 BaoFu Road, Shangmugu community, PingHu town, Longang, Shenzhen, China

After-service:
service@wansview.com
service3@wansview.com
1-323-686-3288 (us only)