Wansview Q7 - Indoor Security Camera Manual

Product Diagram

What's in the Box

Indicator Lights Status

Warm note: Please make sure your router is connected to Internet.

User's Guide

1. Download and Install
   Go to the App Store or Google Play to search and download the "Wansview Cloud" APP on your smartphone. Or scan below QR code to get the APP.

2. Register Account
   Open the "Wansview Cloud" APP and register an account with your email and activate it.
   Tips: Your password must be 8-16 characters, and contains at least the following three categories: numbers, uppercase letters, lowercase letters, or special characters.
3. Add Q7 Camera
   1. Click "Add device" or "+"
      
   2. Select the Q7 camera
      
   3. Device Power On
      
   4. Wi-Fi Setup
      
   5. Scan the QR Code
      
   6. Wait for Connection
      
   7. Pair succeeds
      
   8. The camera is online
      
   9. Live Video
      

Tips:

1. This indoor camera only works with 2.4GHz Wi-Fi, 5GHz Wi-Fi is not supported!
2. Please put the camera near to the router during setting up the camera, after connection succeeds, you can place the camera in another place.

Note: Put the camera close to the router (3 feet) during setting up the camera.

FAQ

The camera can not connect to Wi-Fi?

Please press the reset button on the camera for 5 seconds until the red light flashes quickly and the camera says "reset is successful". Please wait for about one minute, then the camera will flash blue and red light alternately and you can reconnect it now.

Share the camera to another account

1. The invited member should download the Wansview Cloud app, and register a new account first.
2. The main account should open the Wansview cloud app, tap "Settings-invite family members"--press < --choose Country and then enter the invited member's account.
   
3. The invited member needs to open the Wansview cloud app and then click "Receive". If he/she doesn't receive the invitation, please close the app and then open it again.
   

Where is the micro SD card slot?

Please rotate the camera head up, then you will see the micro SD card slot (capacity 8GB-128GB).

Manufacturer: Shenzhen Viewtech Industrial Co., Ltd
Address: 206, Block 1, Shangrong Industrial Zone, No.2 Baolong Road 5, Baolong Community, Baolong District, Longgang, Shenzhen, China
After-service:
service@wansview.com
service3@wansview.com