Wansview Q7 Quick Installation Manual

7
Quick
Installation Guide
I n d o o r S e c u r i t y C a m e ra
Product Diagram
Photosensor
Lens
Microphone
Micro Sd Card Slot
Speaker
Reset button
Power port
Indicator lights
What's in the Box:
Micro-USB
Camera Power Adaptor Matching screws Mounting Accessories
Indicator Lights Status
Light Status Camera Status
Red light on Camera is powered on
Red and blue light alternately flashing Waiting to connect now
Blue light flashing Connecting to Wi-Fi
Blue light solid WiFi connection succeeded
1. Reset camera to factory setting
Red light quickly flashing
2. Camera is upgrading firmware
Warm note: Please make sure your router is connected to Internet.
User's Guide
1. Download and Install
Go to the App Store or Google Play to search and download the "Wansview Cloud" APP on your
smartphone. Or scan below QR code to get the APP.
Download on the
2. Register Account
Open the "Wansview Cloud" APP and register an account with your email and activate it.
Tips: Your password must be 8-16 characters, and contains at least the following three
categories: numbers, uppercase letters, lowercase letters, or special characters.
3. Add Q7 Camera
① Click "Add device" or "+" ② Select the Q7 camera ③ Device Power On
④ Wi-Fi Setup ⑤ Scan the QR Code ⑥ Wait for Connection