External Power Supplies (Sold Separately); Inserting And Changing A Memory Card - Minolta MM-A208 Instruction Manual

EXTERNAL POWER SUPPLIES
The AC Adapter allows the camera to be powered from an electrical household outlet. The AC
Adapter is recommended when the camera is interfaced with a computer or during periods of heavy
use. AC Adapter model AC-1L is for use in North America, Japan, and Taiwan, and AC-2L is for use
in all other areas.
The External High-power Battery Pack Kit EBP-100 is a portable power source and significantly
extends the operating time of the camera. The kit contains a high-power lithium-ion battery, holder,
and charger. The battery, holder, and charger are also available separately.
2

INSERTING AND CHANGING A MEMORY CARD

Always turn off the camera and confirm the access lamp is not lit before inserting or
removing a memory card, otherwise the card may be damaged, and data lost.
A memory card must be inserted for the camera to operate. If a card has not been inserted, a no-
card warning will be displayed on the monitors. Type I and II CompactFlash cards and IBM
Microdrives are compatible with this camera. For memory card care and handling, see page 149.
22 G
ETTING UP AND RUNNING
(SOLD SEPARATELY)
Always turn off the camera and confirm the access
lamp is not lit before changing between power sup-
plies.
1
Remove the DC terminal cover from the left (1). The cover is
attached to the body to prevent loss.
Insert the mini plug of the AC adapter or battery pack into the
DC terminal (2).
Insert the AC adapter plug into an electrical outlet.