Table of Contents
Advertisement
Menu options
Settings
Slide show
Enter
All frames
Playback
Marked
Frames
Duration
1 – 60s.
Repeat
Yes/No
To start the slide-show presentation. Pressing the central button of the con-
troller will pause the presentation. During the slide show, press the down
key of the controller to stop the presentation and return to the playback-
mode menu.
To select all the images in the folder to be displayed in the slide-show pre-
sentation.
To select specific images in the folder to be displayed in the slide-show pre-
sentation. When this setting is chosen, the frame-selection screen (p. 108)
will be displayed. Use the left/right keys of the controller to highlight the
image to be included in the presentation. Pressing the up key will mark the
image with a check icon. To deselect a marked image, highlight it with the
yellow border and press the down key; the check icon will disappear.
Continue until all the images have been edited. Press the controller to set
the marked frames, or press the menu button to cancel the operation and
return to the playback menu.
To select the period each image will be displayed during the slide show.
Selecting "Yes" will cause the slide show to repeat until it is canceled using
the down key of the controller. "No" will end the slide show presentation and
return to the playback-mode menu when all the images have been dis-
played once.
113
Advertisement
Table of Contents
