External Power Supplies (Sold Separately); Changing The Compactflash Card - Minolta DiMAGE 7i Instruction Manual

BASIC OPERATION
EXTERNAL POWER SUPPLIES
The AC Adapter allows the camera to be powered from an electrical household outlet. The AC
Adapter is recommended when the camera is interfaced with a computer or during periods of heavy
use. AC Adapter model AC-1L is for use in North America, Japan, and Taiwan, and AC-2L is for use
in all other areas.
The External High-power Battery Pack Kit EBP-100 is a portable source of power for the camera. The
kit contains a high-power lithium-ion battery, holder, and charger. The battery, holder, and charger are
also available separately. This battery pack will significantly extend the operating time of the camera.
Always turn off the camera before changing between power supplies.

CHANGING THE COMPACTFLASH CARD

A CompactFlash card must be inserted for the camera to operate. If a card has not been inserted, a
no-card warning will automatically be displayed on the monitors. IBM Microdrives are compatible with
this camera. For recording media care and storage, see page 157.
28
(SOLD SEPARATELY)
Remove the DC terminal cover from the left.
• The cover is attached to the body to prevent loss.
Insert the mini plug of the AC adapter or battery pack into
the DC terminal.
Insert the AC adapter plug into an electrical outlet.