Select Shock Setting; Setting Parking Brake - BOB Gear Revolution SE Owner's Instruction Manual

If your stroller pulls LEFT, turn
tracking knob counterclockwise up to
one half turn.
Tracking Knob
If Stroller Pulls RIGHT
If your stroller pulls RIGHT, turn
tracking knob clockwise up to one
half turn.
Tracking Knob
REPEAT roll test and adjust as
needed until stroller rolls straight.
SELECT SHOCk
SETTING
NOTE: Every time
stroller is folded,
stroller shocks
default to 18 kgs
position (Position 1).
1. Remove Child From Seat
2. Set Shock Setting To Position 2
Depress shock release knob and
simultaneously pull toward back of
stroller, sliding knob into position 2.
Knob will "snap" into place when in
correct position.
REPEAT on opposite side.
Position 1: Child 18 kgs or less
SNAP
Position 2: Child 18 to 25 kgs
SNAP

SETTING PARkING BRAkE

The parking brake prevents the
stroller from moving while loading
and unloading. The parking brake is
not designed as a stopping brake.
18 kgs
25 kgs
18 kgs
The parking brake
OMB15/B
14