Table of Contents
Advertisement
TouchPad
Component
TouchPad (includes cable)
Before replacing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the TouchPad:
1.
Disconnect the TouchPad cable from the system board (1).
2.
Remove the Mylar from atop the middle screw of the touchpad (2).
3.
Remove the five Phillips PM1.5×2.0 broad head screws (3) that secure the TouchPad to the computer.
4.
Remove the TouchPad (4).
Reverse this procedure to install the TouchPad.
Bottom cover on page
Battery on page
31).
23).
Spare part number
788607-001
TouchPad
33
Hide quick links:
Advertisement
Table of Contents
