Drawgear - Hobby De Luxe Easy Operation Manual

12.2 Drawgear

12-2
2
• Lightly grease the stationary parts on the case
of the overrunning equipment
5,000 kilometres of driving.
IMPORTANT: The friction elements of the
WS 3000 safety hitch may NEVER be oiled
or greased.
•
Check from time to time to ensure that the bea-
ring surfaces of the thrust rod are not jammed.
•
Clean and oil all movable and stationary parts
regularly.
The axle(s) of the caravan is (are)
fitted with compact wheel bearings.
The cylinder hub, compact bearings
and axle nuts form a closed unit.
The compact bearings are free of
maintenance due to their special
grease.
The wheel brake may never be
repositioned on the fixing lock or on
the yoke end of the bars!
Only reposition the wheel brake on
the self-securing stationary hexago-
nal nut!
You can find further guidelines in
the operating instructions from the
axle supplier.
For safety reasons, the spare parts for
heating devices must conform with
the manufacturer's instructions. They
must be installed by the manufacturer
or an authorised representative.
Coupling ball on base vehicle
Ensure that the coupling ball meets the required
dimensions and is undamaged, clean and free of
grease. When using dacromet-coated (dull silver
anti-corrosion coating) as well as lacquered cou-
pling balls, the coating must be removed com-
pletely with sandpaper (200-240 grain) so that
it does not create deposits on the friction lining.
The metal surface of the coupling ball must be
bright. A damaged or dirty coupling ball causes
increased wear and tear on the friction pads; a
greased coupling ball negates the stabilizing ef-
fect. Thinning solvents or spirit are both suitable
for cleaning.
k
after every