Audio Unit Menus; Automatic Volume Control; Digital Signal Processing (Dsp); Audio Distortion Reduction (Clip) - Ford Transit Owner's Manual

AUTOMATIC VOLUME
CONTROL
This function adjusts the volume level to
compensate for engine and road speed
noise.
6000CD and 6006CDC
1. Press the MENU button repeatedly
until AVC is shown in the display.
2. Use the seek up or seek down button
to adjust the setting.
3. Press the MENU button or allow the
system to time out to confirm your
selection.
Sony CD
1. Press the MENU button.
2. Using the up or down navigation button
scroll through the display until AVC is
shown in the display.
3. Press the MENU button or allow the
system to time out to confirm your
selection.
DIGITAL SIGNAL PROCESSING
(DSP)
DSP occupancy
This feature takes into account the
differences in distance from the various
speakers in the vehicle to each seat. Select
the sitting position for which the audio is
to be correctly enhanced.
DSP equaliser
Select the music category that most suits
your listening preference. The audio output
will change to enhance the particular style
of music chosen.
Transit (TT9) Vehicles Built From: 26-09-2011, Vehicles Built Up To: 31-12-2013

Audio unit menus

Changing the DSP settings
1.
2. Use the up and down navigation
3. Press the button between the
AUDIO DISTORTION
REDUCTION (CLIP)
This function automatically detects sound
distortion and reduces the volume level
until the distortion has been eliminated.
This means that whilst the display might
change numerically when you raise the
volume manually with the control, there
may be no actual increase in sound.
6000CD and 6006CDC
1.
2. Press the MENU button repeatedly
3. Using the seek up or seek down button
4. Press the MENU button or allow the
Sony CD
1.
2. Using the up or down navigation button
3. Press the MENU button or allow the
193
Press the DSP button once for
occupancy and twice for equaliser. For
item location: See Audio unit
overview (page 181).
buttons to select the required setting.
navigation buttons to confirm your
selection.
Press and hold the MENU button until
the display changes.
until CLIP is shown in the display.
turn the function on or off.
system to time out to confirm your
selection.
Press the MENU button briefly.
scroll through the display until CLIP is
shown in the display.
system to time out to confirm your
selection.