Battery Condition Indicator; Auto Power Save; Connecting The Optional Ac Adapter - Konica Minolta DiMAGE Z6 Instruction Manual

Battery condition indicator

This camera is equipped with an automatic battery-condition indicator. When the camera is on, the
battery-condition indicator appears on the monitor. If the monitor is blank, the batteries may be
exhausted or installed incorrectly.
Full-battery indicator - the battery is fully charged. This indicator is displayed for
three seconds on the monitor when the camera is turned on.
Low-battery indicator - battery power is low. The battery should be replaced as
soon as possible.
Low-battery warning - battery power is very low. The monitor indicator is red.
The battery should be replaced as soon as possible. This warning automatically
appears and remains on the monitor until the battery is changed. If power falls
below this level, the battery-exhausted message will be displayed just before the
camera shuts down. If the low-battery warning is displayed some functions such
as the Progressive Capture drive mode, movie recording, and Anti-Shake system
cannot be used.

Auto power save

To conserve battery power, the camera turns off displays and unnecessary functions if an operation
is not made within a minute. To restore power, press the shutter-release button partway down, or
press the main switch or controller. The length of the auto-power-save period can be changed in
section 1 of the setup menu (p. 87, 88, 90).
If an operation is not made within approximately 30 minutes, the camera turns off automatically.
Press the main switch to turn on the camera.
14 Getting up and running

Connecting the optional AC adapter

Always turn off the camera before changing between power supplies.
The AC Adapter AC-11 allows the camera to be
powered from an electrical household outlet. The AC
Adapter is recommended when the camera is inter-
faced with a computer or during periods of heavy
use.
Open the terminal cover (1) and insert the mini plug
of the AC adapter into the DC terminal (2).
Insert the AC adapter plug into an electrical outlet.
1
2
15